Cricut

More Babycakes Cards

babycakesflowerletter   I don’t know about you all, but I am definitely a visual person.  I do enjoy reading, but when I am on the internet, I really like to see photos and even some ‘how to’ ones along the way.  (even if they aren’t so pretty!)  That being said, I am trying to include what I would like to see.

I made this card, two versions actually with the left overs from the two previous cards.  I should have been cleaning up my supplies and transitioning over from spring/summer to autumn/winter products, but these scraps were just sitting on my desk waiting to be used!

The card front is chocolate CS.  On that I placed a left over strip with letters to the left and another scrap of autumn terracotta next to it.   I used the brand new stitch guide to pierce some holes in a scallop pattern, then using a simple backstitch filled in the holes with chocolate floss.

The new stitch guide is amazing.  You just line up your paper with one of the grid lines and using a piercing tool punch through each hole.  I’ve found I work faster if I punch through the front with the piercing tool, but stitch holding the card with the back side facing me.

stitchingdryembossingstep1

If you don’t know this, I love that the cricut cartridges work with our stamp sets so perfectly.  I used Art Philosophy and an old workshop stamp set “Lucy” to create these flowers.  I cut them out of colonial white and then colored them using buttercup and sorbet makers.  I stamped the flower outline in slate.  After they had dried I used the rub on tool and the mat for the stitch guide and dry embossed the flowers.  (see photo right & below.)

dryembossingstep2

 

I forgot to mention I was using card number 28 from the Make if From your Heart Vol2 as my inspiration piece.  I cut a scrap of buttercup cardstock (3.5×3) and Colonial White CS (2.5 x 3).  I matted the colonial white on the buttercup and stamped the word “celebrate.”  I then attached the flowers with glue dots and added the new metal flowers.

Each CTMH pattern paper comes with a zip strip along the top that tells the paper name and coordinating colors on one side and some patter or words on the other.  I cut two pieces from the zip strip (1.25 & 1.5), made ribbon ends on them and attached them to the upper right of the card.  The inspiration piece had a button as an accent, but the Lucy stamp set had a butterfly that coordinated with the Art Philosophy cartridge, so I cut out a butter fly and then rock and roll stamped it to create the multi colored wings.  Always practice so you can get the feel of how far to roll the stamp into your ink.  (see my scrap paper!)

rocknroll1

I always line my colors up lightest shade to darkest.  This will help me from putting darker ink on the lighter pads.  So I ink my full stamp in my lightest color.  In this case Crystal blue.

rocknroll3

In the next color, sunset, I tip the block to just get ink on part of the stamp.  (The bottom of the butterfly)

 

 

rocknroll4

You can see where you have your ink when you use Acrylic Stamps.  (another reason to love them!)

rocknroll5

 

 

 

Then with my darkest color, Slate, I roll the top of the butterfly into the pad..  You can see on my scrap paper that I practiced a few times to help me reach the effect I was looking for.  I didn’t like the rocking and rolling I had done in a different order, but when did it the way described above I liked it.  I recommend doing several different combinations of coloring to find what works for you and your project.  Once you have it all inked up, line it up on your precut shape and watch your butterfly transform.  I have a small craft foam pad under my scrap paper.  It helps ensure a good stamped image.  You can also use the foam that comes in the My Acrylix stamp sets as well.rocknroll6After I stamped the butterflies, I added some more Slate ink around the edges to blend the colonial white CS that was peaking through.

generationstampAnother stamping technique I used on this card is second generation stamping with our two stamp images.  Still using the Lucy stamp set, I inked up the solid flower petals in Sunset and stamped it on my scrap paper, then without re-inking I stamped it again on the inside of my card.  This made for a lighter shade of Sunset.  Then I used the outline flower stamp and sunset and lining up my image stamped over my solid flower petals.  I will sometimes drag the bigger solid images across the stamp pad to give it a different effect, or twist it.  Try out several different inking scenarios to see what will work best for you.

Here’s a look at the other card.  Everything is about the same except I dry embossed the flowers so the petals would curl up and I used the polka dot side of the patterned paper on the left edge.  I also choose a different stitch pattern so I can learn what I might like to use latter on my scrapbook projects.

 

Happy Crafting!

babycakesflowersdots

 

 

Brownie Points Card

As I mentioned yesterday I had all the pieces cut out to do a second card, so here it is.  I like the brownie points saying, and I swapped out the chocolate rickrack for a twill chocolate ribbon.  Also change the orientation of the card.  I made another envelope for this card as well, but didn’t take a photo.  Sorry!

BabycakesbrowniepointsTo make both of these cards I used the following supplies:

1 – 12″ x 12″ patterned paper (Babycakes)
1 – 8.5 x 11″ Chocolate CS
1 – 8.5 x 11″ Autumn Terracotta CS
1 – 8.5 x 11″ Colonial White CS
Scraps of White Daisy CS (for stamped images)
Inks: Chocolate, Sunset
1 – red sparkle gem and
10 silver sparkle gems
adhesive tape, liquid glass, liquid applique (see previous post), glue dots, foam tape.

It’s raining again today, so I’m trying to be productive in my studio space.  I did manage, with my husband’s help, to add a Order Now button for the New Idea Books. I’m also sorting out product that has been delivered and trying to put it away!   They’ve been sitting in boxes, and I’m ready to play!  Now before you gasp that how could I let it sit in boxes, we have a farm, and they arrived in July.  It’s long  days taking care of kids, tractor driving, meals, and trying to stay on top of laundry without worrying about my CTMH goodies.  I will assure you that each box was opened and I pawed through it, but I then went to bed so I could start the next day refreshed!

Time to migrate from the Spring/Summer stamps and supplies to the Autumn/Winter ones.  Maybe for most people that’s not too hard, but I have a catalog for my stamped images, so I need to scan all the new stamps of the month, workshops and other stamps sets before I add them to my boxes.  I also need to move all my workshop samples from last fall into my family albums, making room for the new workshop samples for the new paper packs.    Once those things are done I have some general pickup/re-org in the studio (by the way, I use the word studio to describe my workspace not because it’s an over the top space with huge tables and well decorated, but  because one of my friends told me that  art is created in studios, and words are powerful.  So, instead of going to my office or craft table, I choose to go to my studio).

Guess I should go to work.

Happy Crafting!

 

Babycakes Chocolate Card

I’m trying to keep my Thursday for crafting days.  It’s getting off to a rocky start,completed card but I have managed to put together one card with the supplies to do another one quickly.  Here it is!

I started with one sheet of Babycakes paper  and cut a 4″x12″ strip.  I made a top fold card with the letters on the outside and the dots for the inside.

I then cut 3 strips of cardstock, size 1.75″ x 3.75″, one each from Chocolate, Autumn Terracota & Colonial White.    I was using a card from the Make It From The Heart Vol 2 as my inspiration.augustsotm

 

I had stamped the images from “A Chocolate Affair” (Aug Stamp of the Month that you can get free with a $50 purchase) and cut out some of the images.  After deciding on the cupcake and the sentiment, I need to figure out how I wanted to use them on the card front.  I cut the medallion piece using the Art Philosophy cartridge and then decided I needed the 2.5″ x 2.5″ piece of Autumn Terracotta CS to mount it on.    babycakessockI put the cut out cupcake on a rectangle of colonial white cardstock and to help it stand out from the autumn terracotta strip I added a small piece of colonial white behind the square.  The cupcake needed some dimension so I added liquid applique to the center layer and then using my heat gun puffed it to look like whip cream.  The liquid applique can leave a sticky residue, so I have a baby sock filled with corn starch that I tap over the puffed liquid applique and it takes all the stickiness away.

directink

Some of the pieces I used a sponge to put chocolate ink along the edges, but others I dragged the paper along the ink pad.  You get a finer edge when you drag it verses using the sponge.  I will use both techniques often.

babycakespopdot

After adding both colonial white and chocolate rickrack ribbon, I placed the large square and then pop taped the medallion and cupcake to it.

babycakesliquidglassAfter adding the “Chocolate is good for you” sentiment with pop dots on the top left, I put 5 dots of liquid glass (my favorite adhesive) on the left edge of the medallion to secure the sparkle gems I am still trying to use up.  (Side note, sometimes when things are on sale, they really aren’t worth it.  I purchased a pack with 100s of unglued sparkles thinking how great it was.  Only liquid glass has prevented me from throwing them away.  I only purchase pre-glued gems now, and also have learned that CTMH gems the glue stays with the gem and actually will attach well to your project.)

Now we’re on the home stretch.  The inside needed a base for me to write on, so I added that and the two little ends that remained from cutting my strips for the front of the card.

babycakesinside  Because CTMH paper is thicker than most papers on the market, it can easily be used as a card base (or scrapbook base for that matter.)

Now I just have to customize my envelope.  (I don’t like it when the envelopes are too big, and I like getting three bases out of my 12×12 sheets.)    So, to start I seal my envelope closed, then I cut 1/2″ off the long side (top).  I attach a piece of pattern paper that I’ve scored at 1/2″ along the long edge (2″ wide x length of envelope).  I glue the small 1/2″ flap to the front of the envelope and fold the rest of the paper over to the back to make the flap.  I like to use a corner rounder to clip the two corners on the flap.  You’ll need to use adhesive to seal the envelope before you send it.

Here’s the completed cardfinal card and envelope.

 

Happy Crafting!

 

October Cropping Weekend

Today I’ve been finalizing my contract for our upcoming cropping weekend.  It’s got me thinking about menus, projects and guessing who is going to be able to join us this year.  cropwkn3We’ve grown so much and I know if we had everyone that has ever come we would be maxed out of our space.

It’s a smaller weekend (35 max attendees), and I love it that way.  Each weekend we do a card project, a scrapbook project and a home décor or alterable item project.  Here is our home décor project we did a couple of years ago.

In preparation for the weekend I asked everyone to provide me with their favorite 3 CTMH paper packs, keeping in mind the project would most likely be in their home.  Happily I was able to provide everyone with their first paper choice and we made these family blessing boards.

I cut the sir names for everyone and pre-printed the verses on vellum.  They then got to decorate it however they liked.

cropwkn2

Apparently my “quilt” look was a hit as everyone did a similar layout.  We used the heavy chipboard coasters from the Memory cubes (retired) to hold our verses above our backgrounds.  Everyone decorated theirs a bit differently.

One gal learned a new technique, to her, and created some leaves with a circle punch and a dry embossing stylus.

cropwkn1bAnother regular at my workshops pulled out the Cricut and using Art Philosophy cut out some sweet leaf CS branches and leaves.  She too used her embossing stylus and brought the leaves to life before placing them on her board.

I found these “wine chalkboards” at OTC in their clearance sections.  I love creating thing from garage sale and clearance bin finds!

Not sure what all three of our projects are going to be this year.  I’m sure they will be fun!  If you have any great ideas, please share.  I’m always looking for inspiration.

Happy Crafting!

 

August Club Night Project

 

JulySOTMcardoutsideYes, I have the project for next club night all figured out!  phew.  Now that CTMH and their supplier of our alcohol markers have achieved full manufacturing of them I am ready to teach a class on marker coloring.  Alcohol markers are very different from ink markers, and thus require a different approach.  I’m not going to go into details today as a tractor is warming up for me, but I promise to publish something later.  I hope to have a hand out for club night, so I’m sure I can link something on here once I get the write-up instructions done.

Now, on to the assembly of this wonderful card.  I used a piece of patterned paper from the new Sarita papers.  I cut it 4.25 x 5.5 then cut a .25 frame and flipped the inside rectangle over to create a matted effect.  I used the zip-strip from the top of the paper and cut a 4.25″ piece.  I put this over the patterned paper. Using the new Artbooking cartridge I cut the lattice out of chocolate cardstock. (I lent my cartridge to another consultant, so I can’t tell you the page number right now.)  I lightly sanded the lattice letting the white show through.  Using a 2×2 white daisy cardstock square I stamped the cherries using our black pigmet ink.  While I waited for the ink to dry (pigment ink takes longer, sigh), I cut seven 1/2″ flowers from the Art Philosophy cartridge p50.JulySOTMcardinside I also cut a branch with leaves on it p43 out of pear cardstock.  I removed the leaves from the stem and folded them to give them character, then put dots with a ruby marker in the centers of the flowers.  I use the rub on tool to cup the flowers, then turn each cupped flower over and again using the rub on tool rub only the center of the flower to make it have dimension.   (I’ll try and get a better photo of that for you.) By now the pigment ink had dried and I colored in my leaves, branch and cherries with pear, ruby, blush, and the blending markers.  (more on the technique later.)  I sponged the edges of my 2×2 square with sky ink and pop dotted it on the lower right corner of the card.  The inside of the card used one of the sentiments from the July Stamp of the Month along with part of the apple stamp.  (The card isn’t really bent, but I couldn’t get it to stand up for the photo.)